Firat FBK 16 000 BUS Spraybooth 72000 M3H
Product Description:
A Painting and Drying Spraybooth is the structure where a vehicle is painted with a spray gun. It has a low-pressure air channel where the air is removed from the facility through a filtering system.
Paint stop filters remove various dust and particles from the air. The spray booth unit is equipped with fan-motor units that can be installed on the facility floor, with an entrance ramp at the front and a metal basement to connect to the air circulation units.
Function:
The auto painting and drying operation follows strict health and safety guidelines. It conforms to TSEK which is determined by the Quality conformity certificate no. 35 -14.02/1557 of 2001. Under Law no. 132 and TSE legislation, the “Production Compliance Certificate” has been approved. Analysis conducted by TUBITAK ENERGY SYSTEMS and ENVIRONMENT RESEARCH INSTITUTE ENVIRONMENT DIVISION, stated in report no. B.02.1BAK.5.01.52.00/2015 and Project no. 51H2402, that FIRAT Auto Painting Spray Booths do not constitute any environmental pollution.
- Images are for illustration purposes only
- All preparation bays, mixing rooms, and spray booths can be customised according to your requirements.
Please contact us for more information.
Technical Specifications
| TECHNICAL DETAILS | |
Internal Dimensions |
| 16.000(L) X 5500(W) 4970(H) mm |
External Dimensions (Without Units) | 16.200(L) X 5620(W) X 5600(H) mm | |
|
| (Units are excluded) |
|
|
|
Entrance Door |
| 3800 (W) x 4205 (H) mm |
Quantity of Entrance door leaf | 4 PCS | |
Service Door |
| 800 (W) x 2127 (H) mm x 2 Pieces |
Lighting | Top Lighting | 88X36W |
Lower Lighting | 72X18W | |
| ||
| Fan Motors | 4 X 7,5 HP (5,5 KW) |
Fresh Air and Heating | Air Flow | 72.000 m³/h |
Burner | 2 x 250.000 Kcal/h – Diesel burner | |
Units | ||
Exchanger | 1800 mm | |
| ||
| Max.Drying Temperature | 60⁰C / 80⁰C |
Exhaust Unit | Fan Motors | 4 X 7,5 HP (5,5 KW) |
Air Flow | 72.000 m³/h | |
| ||
Floor Filter |
| EU3 |
Ceiling Filter |
| EU5 |
Grates |
| 1 Line Grates (Concrete Excavation project will be |
|
| made.) |
|
|
|
Max.Weight |
| Without Metal Basement (With Tunnel) |
Metal Basement |
| NO |
Plenum |
| 600mm |
Max.Electric Power |
| 55 KW |
|
|
|
Panel Electric Voltage |
| Power 380 volt |
| Control 24 volt | |
|
| |
|
|
|
|
| Fresh Air: 700x500mm x 4 Pcs |
Duct |
| Exhaust: 600x600mm x 4 Pcs |
|
| Burner: 235x235mm x 2 Pcs (if diesel oil burner) |
|
|
|
| UNIT DIMENSIONS (L x W x H) – Dimensions mm | |
Fresh Air Unit Dimensions | 2200 x 1450 x 1430 | |
Exchanger Unit Dimensions | 2200 x 880 x 2110 | |
Exchanger Length |
| 1800 mm |
Exhaust Unit Dimensions | 2400 x 880 x 2080 | |
|
|
|
Main Cabin
Side walls are made of galvanized sheet of 1 mm, with 60 mm glasswool insulation. In order to provide an ergonomic view and longer life, outside surface of the panels are painted with import static powder paint.
Our products have the illumination system which had been designed in order to optimise the color control during the painting phase.
In the spray booth, exists a hanger system with rails hanged up to the ceiling, which enables parts painting beside the automobile.
Ceiling; is the section which provides the homogeneous flow of the air coming from heat exchanger, through the plenum and filters.
Ceiling consists of sheet panels with special insulation support and in order to clean the air supplied to the booth, filter item made of non-flammable material, special high performance, long life is placed under the ceiling.
There are 3 doors in fron and at the back of the booth, and 1 door system for personel entry and exit. Door items have observation windows made of safety glasses. Thickness of the doors is 60 mm and insulated with 60 mm glasswool. All Windows include glasses.
Air Make-Up Unit
This unit supplies the filtered fresh air into the booth and throws the used air to outside during the painting. On the other hand, during drying it heats the air up to 60 °C and supplies into the booth, mix used air with fresh air in proportion of 10% (through the multi damper) and circulates it after re-heating.
Heating of air is provided by a diesel burner having a capacity of 250.000 kcal/h and an exchanger made of stainless steel sheet having 304 quality. First start up and rising the air temperature up to 60 °C takes aproximately 15 minutes, depending on outside weather conditions.
Delivery of the heated or not heated air into the booth or circulation of it is provided by two industrial type fans, each having the capacity of 48.000 m³ / h. In this unit air is delivered to the booth after filtered by a pre-filter. Additionally output air is controlled by a damper in the output air channel.
Electrical System
Electric and Command Panel
Panel in which the motors and devices in the enclosure of the proposal are operated and controlled from a central point in order to provide them to fulfill their functions.
Panel is made of GALVANIZED sheet and steel profiles, which are bump resistant, completely covered, water proof and damp proof.
Panel shall include all switches and fuses necessary for motors and electrical devices, where appropriate signal lamps, thermic relay, contactor and clemences.
Wiring
Command and control connections from electric panel to motors and other electrical devices shall be done with heatproof cables. Electric lines shall be placed on a basis so that formation and replacement is easy.
Ready to operate devices: 380 V.50 Hz. Voltage of control devices is 24 volt
